Tips On How To Cut Decorative Concrete

Tips On How To Cut Decorative Concrete

Decorative concrete is lovely, but you’ll need to know how to cut it for appropriate results.

The wrong approach to cutting can lead to detrimental results that are hard to handle. It’s best to look at a robust solution that is going to ensure you’re able to cut with ease. This is what a proper plan is going to do for you.

The right plan can ensure you can cut without making mistakes and everything falls in line for you and the project.

Here are the tips you need to know.

1) Find Suitable Blades

The blades have to be perfect, or that is going to be the end of your project.

You want to get a blade that is made to handle concrete as it is rock hard. You can’t cut with other blades such as the ones that are used for wood. Those are going to break into pieces as soon as you put them against the concrete.

You need to cut with the right equipment, and that is an investment you will need to make as soon as you can.

Delaying this investment is asking for trouble, and that is not what you need right now.

2) Measure Everything

You need to take out the measuring tape to make sure everything is in line, and you are cutting as much as you need to.

The last thing you want is to make a wrong cut because you weren’t paying attention to the measurements. If you are going to put in the hard work and look to cut concrete, you should be hoping to do it the right way.

This is how you are going to be content with the concrete and how it appears in the long-term.

Don’t delay this and assume it will work out for you.

3) Don’t Force Blade Into Concrete

This is a real worry because those who have the right concrete blade might think that’s all they need. However, this is an issue because forcing the blade is going to ruin the concrete. You need to ease the blade into the concrete and let it cut as you want.

If you push hard, you are only going to ruin the integrity of your concrete, and that’s not worth it.

If you’re going to do this, you want to do it the right way, so the decorative concrete looks as it is supposed to.

These are the tips that are going to give you real value with the decorative concrete and will make sure it stands out. Yes, there are many details to go through, and you’ll need to focus on the variables, but that’s why you have to be patient.

If you focus and look at cutting with patience, you will see good results, and it’ll work out for you.

You want to cut with these tips in mind as that is going to let you control how the concrete is cut into and how it appears in the long-run.

Decorative Concrete Joints Are Essential To Prevent Cracks

Decorative Concrete Joints Are Essential To Prevent Cracks

Concrete expands and contracts as the temperature changes. Over time, this can cause it to crack if there are not joints in the surface that are designed to allow for this expansion.

With decorative concrete, the process of creating joints can be quite challenging. The pattern that is stamped on the surface of the concrete needs to be taken into account when deciding where to place the joints. In most cases, concrete installers need to get a little bit creative when it comes to placing decorative concrete joints so that they don’t ruin the look of the finished slab.

The vast majority of the time, the joints are designed to follow the stamped pattern on the surface. For instance, if the concrete is stamped with a brick pattern, the joint will be created to follow along with the edge of the bricks. This helps it blend more seamlessly into the existing pattern, making it possible to maintain a cohesive look.

Unfortunately, this method only works well with patterns that have straight edges such as bricks, pavers, or wood. Providing joints for patterns that are a little bit more abstract such as fieldstone or cobblestone usually requires a different process. It is important to remember that expansion and contraction happen in all directions with concrete – not just in the opposite direction of the joint. That means that the joint could expand apart or it could slide forward and back, depending on how the expansion occurs.

That is why the relatively jagged lines of cobblestone won’t work for creating a joint. If it were to move forward or backward, it would come in contact with the other side of the joint, potentially causing cracks to occur.

Most experts recommend using a cutoff saw to create the joints in the concrete. Although the joints don’t have to go all the way through the concrete, they do have to be deep enough in the surface to allow for proper expansion and contraction. Typically, this means cutting them to a depth that is at least 25% of the total depth of the concrete.

Stamped concrete and other types of decorative concrete can really add a lot to a property. In order to ensure that the concrete lasts for many years to come, however, it is important to think about including joints for expansion and contraction.

Because the surface is covered with a pattern, it can be a little bit more difficult to create joints for these pieces than it is when pouring standard concrete. It takes careful planning to figure out where to place the joint so that it won’t disrupt the overall look of the finished piece.

By learning as much as you can about decorative concrete joints ahead of time, you can decide which method is the best option for the piece of concrete that you are pouring. Properly creating joints in the surface will help prevent any cracks from occurring over time. This can allow the concrete to last for many years, which is why it is so important to make sure that the joints are created correctly.